DIY Halloween Pumpkins With Cricut | Abbi Kirsten Collections (2024)

Pumpkins are one of the most popular and iconic decorations for Halloween and the Fall season. But carving a pumpkin can be messy and time-consuming, not to mention that some people just don’t enjoy the process. These DIY Halloween pumpkins are perfect if you’re looking for an alternative to traditional pumpkin carving!

How to Make DIY Halloween Pumpkins with Cricut Vinyl

The fall season is the perfect time to start thinking about how you want to decorate your home for Halloween. If you’re like me, my first thought is the front porch since people first see it when they visit our home. These no-carve DIY Halloween pumpkins will be the talk of the block!

Although I’m listing the exact supplies and steps I use, feel free to get creative and use acrylic paint or even hot glue some 3D effects like a witch hat or leaves to your pumpkin to really make it pop.

DIY Halloween Pumpkins with Cricut: Supply List

• Krylon spray paint – I used a flat, chalky color for a softer look. You can always get creative and use metallic or glossy paint. Likewise, you can leave the pumpkin its original color.
• Faux pumpkins
• Permanent vinyl (I’m using Smart Vinyl here)
• Cricut cutting machine
• Weeding tool
• Cricut scraper tool
• Glitter colors of your choice
• Mod Podge
• Foam paintbrush
• Painters tape

To get started, you’re going to want to get some faux pumpkins from your local craft store or dollar store. If you’re doing a whole set, make sure you grab different sizes and pumpkin shapes for an interesting grouping.

Step 1: Paint Your Faux Pumpkins

You’ll want to tape off the stem with painter’s tape to keep it the color it is or to do a glitter stem. Some pumpkin stems are removable, so carefully check your pumpkin’s structure before trying to remove it.

Once you’re ready to paint, you’ll want to use short little bursts with a swooping motion to cover the pumpkin well and ensure you don’t get too much paint in one spot. Start with painting the top, then flip the pumpkin to paint the bottom after the top fully dries.

Step 2: Add the Halloween Designs into Design Space

While your pumpkin dries for about 20 minutes, download your free Halloween SVG cut files for this pumpkin craft. Log in here to the AKC Freebie Vault and find these SVG files with the keyword “pumpkins.” I have a ghost, black cat, and witches hat pattern available. Of course, you can add any design you like!

Load the free Halloween SVG files into Cricut Design Space. If you are new to Cricut, read my tutorial on how to upload an SVG file here!

Step 3: Cut out the Halloween SVG designs

You’ll want to keep the vinyl designs small to fit on your pumpkin better and let them follow the curves and indents on your gourd, so the vinyl lays flat.

Cut your designs with permanent vinyl. You can use removable vinyl, but permanent vinyl will stay better year after year. Next, weed the ghosts, black cats, and little ghosts carefully, making sure the designs are securely stuck to the backing before you add your transfer tape to the front.

Use your scraping tool to burnish the back and press the front of the vinyl to ensure all of the small letters and sparkles attach to the transfer tape. Check out all my Sanity Saving Vinyl Hacks here!

Slowly peel the backing off in a diagonal direction, pushing and rolling the vinyl a bit when pieces of the design do not want to stick to the tape.

Step 4: Apply the vinyl design to your faux pumpkins

Once your backing is off, cut the designs apart so you’re working with a smaller area at a time. Then, place the vinyl cutouts on the pumpkin, pushing the design into the creases so that the design really sticks to the curves of the faux pumpkins.

Then, slowly peel the transfer tape away in a diagonal direction, pushing and rolling the tape to get the designs to stick to the pumpkin.

Continue the process until you have all of your Halloween vinyl designs on the pumpkin. If one of the pieces gets a small bubble or wrinkle, use the weeding tool to gently lift the vinyl, then press it into the contours to smooth it out.

Again, a smaller design (between 1.5″- 2″ each) will work better on the pumpkins. If your pumpkin is larger, you can go a bit bigger, but remember that larger vinyl pieces tend to have a harder time sticky to the surface. Check out my Hocus Pocus large pumpkin here to see how I decorated it with bigger words and images using permanent vinyl.

Step 5: Add glitter to your stem

Finally, use Mod Podge and the paintbrush or a foam paintbrush to cover the pumpkin’s stem. Sprinkle a thin layer of gold glitter on the glue, then tap it to remove the excess. Set aside to dry.

Once the stem is dry, you can use hot glue to attach the stem to the top of the pumpkin if you are able to remove it. If you left the stem on the pumpkin, you’d need to tape off the area carefully before you glue and glitter to keep it off the pumpkin area.

To watch this project step by step, you can visit the full tutorial for these DIY Halloween Pumpkins With Cricut Vinyl.

You can’t beat this easy Halloween craft when decorating for a Halloween party or your home! You may also love this not-so-scary woodland animal faux pumpkin craft! They’d even make a fun and easy pumpkin Halloween idea for an activity for the whole family to do together.

These easy Fall craft ideas even a great kid-friendly, no-carve DIY pumpkin craft that uses Cricut vinyl to make the cutest jack-o-lanterns. If you are looking for more pumpkin ideas to dress up your home this autumn season, you will also love these 3D paper pumpkins!

DIY Halloween Pumpkins

Active Time: 3 hours

Total Time: 3 hours

Difficulty: Easy

You can make these fun no-carve Halloween pumpkins with these festive vinyl cutouts! Download the Halloween design SVG files to make this simple craft.

Materials

• Krylon spray paint
• Faux pumpkins
• Permanent vinyl
• Cricut cutting machine
• Weeding tool
• Cricut scraper tool
• Glitter colors of your choice
• Mod Podge
• Foam paintbrush
• Painters tape

Instructions

Step 1: Paint Your Faux Pumpkins

• Tape off the stem. If it's removable, remove it and set it to the side.
• Spray paint the pumpkin using short little bursts with a swooping motion to cover the pumpkin well. Allow the pumpkin to dry between coats if needed.

Step 2: Add The Halloween Designs Into Design Space

• To download the free SVG cut files,log in hereto the AKCFreebie Vaultand find them with the keyword “pumpkins.”
• Load the SVG files into Cricut Design Space.

Step 3: Cut Out The Halloween SVG Designs

• Keep the designs small so they fit the curves and indents of the craft pumpkin.
• Cut the designs with your Cricut and permanent vinyl (which will stay better over time).
• Weed the designs, then apply the transfer tape, and then use the scraper to make sure the vinyl designs are well-adhered to the transfer tape.

Step 4: Apply The Vinyl Design To Your Faux Pumpkins

• Cut the transfer tape into smaller pieces so they're easier to work with.
• Apply the vinyl cutouts to the surface of the pumpkins, pushing the design into the creases so that the design really sticks.
• Slowly peel away the transfer tape.
• Repeat with all of the vinyl Halloween designs until you're pumpkins are covered!

Step 5: Add Glitter To Your Stem

• Cover the pumpkin stem in mod podge using the foam paintbrush.
• Apply the glitter over the glue, then tap to remove the excess. Let dry.
• Reattach the stem to the pumpkin once it's dry.

Did you make this project?

Please leave a comment on the blog or share a photo on Instagram

About Abbi Kirsten

Welcome to my colorful corner of the internet, where we play with vibrant crafts and unlock your creative magic! Hang out with me and get lost in a fun array of projects, tutorials, and products, from stunning papercraft ideas to flower templates, Cricut help for beginners, and endless crafter’s hacks.

Join theMember Vaultand participate in my monthly Craft-Alongs in myFacebook group to access all the magic!